hey, so um I rgh'd this Xbox today I did all the nand malarkey soldered the cool runner to the board got the CPU
key then write the updflash.bin and it was all smooth sailing, unpluged the console for a bit and left it unplugged for about 30 seconds after that I put the case and everything back together, plugged it in and pressed the power button, nothing no noises no light on my rol board so I figured it was most likely the stby_clk ripped it open and used the alternate stby_clk point on the bottom of the board, plugged it in red light on my PSU and the same as before no noises or light on the rol board nothing :/ I tried a couple different psu's, outlets and 3v3 wires that I had lying around. Still nothing. There is no bridged or loose connections I am sure, I don't know what else to do, honestly. :/ thanks for reading.